W.S.Tyler Ro-Tap測試篩振篩儀具有獨特的二維操作：水平圓周運動和垂直敲擊運動。這種特殊動作使物料顆粒分層并“尋找”測試介質中的關鍵開口。該設備提供準確和一致的顆粒分析測試，且維護需求極少。RX-29設計用于直徑為8英寸的測試篩。RX-30型號設計用于直徑為12英寸直徑測試篩。每件產品在發運前均經過測試運行和序列化處理，并配備有99分鐘數字計時器/時鐘，精度為0.1秒。

篩網數量：

型號	全高	半高
RX-29 (8 in. 或 200 mm 直徑)	6個篩子，全高盤	13個篩子，配有半高盤
RX-30 (12 in. 或 300 mm直徑)	4篩，全高盤	8個篩子，配有半高盤
RX-30 (12 in. 或 300 mm直徑)	6個篩子，帶半高盤	8個篩子，配有半高盤

在1725轉/分鐘，60周期電流下

描述	編號 #
115v (8 in. test sieve)	RX-29
230v (8 in. test sieve)	RX-29-16
115v (12 in. test sieve)	RX-30
230v (12 in. test sieve)	RX-30-16

在1425轉/分鐘，50周期電流下

描述	編號#
115v (8 in. test sieve)	RX-29-2
230v (8 in. test sieve)	RX-29-10
115v (12 in. test sieve)	RX-30-2
230v (12 in. test sieve)	RX-30-10

規格：

每分鐘振蕩次數：278 ± 10

振蕩位移：1-1/8 in. x 7/16 in.

每分鐘輕觸次數：150 ± 10

尺寸：28 in. wide x 21 in. deep x 25 in. high (71 cm x 54 cm x 64 cm)

重量：180 lbs. (82 kg)

測試應用：

  RX-29: 2 in. through US #635 mesh (20 μm)

  RX-30: 4 in. through US #500 mesh (25 μm)

RO-TAP® RX-29和RX-30零件圖示

RO-TAP® RX-29和RX-30零件

Item #	Part #	描述	Required
1	107770	Base	1
2	R-20029	Hammer	1
3	R-20023	Hammer Block	1
4	R-30019	Sheet Guard	1
5	R-30010	Rotating Guard	1
6	R-10036	Lift Rod	2
7	R-10038	Upper Main Shaft Washer	1
8	R-20027	Main Shaft	1
9	R-30008	Upper Carrying Plate: RX-29 (plastic)	1
9A	R-30008-1	Upper Carrying Plate: RX-29 (heavy-duty cast aluminum)	1
9B	R-30027	Upper Carrying Plate: RX-30 (steel)	1
10	R-30009	Lower Carrying Plate	1
12	R-20039	Cam Gear	1
13	R-30015	Timing Belt Pulley	1
14	R-10034	Eccentric Discs	2
15	R-10032	Block	1
16	R-30007	Sieve Cover (RX-29)	1
	R-30011	Sieve Cover (RX-30)	1
17	R-30006	Sieve Support Plate (RX-29)	1
	R-30013	Sieve Support Plate (RX-30)	1
18	R-30023	Sieve Support Clamp Bar (RX-29)	1
	R-30022	Sieve Support Clamp Bar (RX-30)	1
19	R-20019	Backup Plate	1
20	R-20020	Bearing Plate	1
21	R-20033	Shield	2
22	R-10028	Tube Spacer	2
23	R-10029	Cam Shoulder Screw	1
23A	106582	1/2 in. ID Shim	2
24	R-10042	Main Shaft Key – Eccentric	2
25	R-10039	Main Shaft Key – Lower	1
26	R-10035	Hammer Pin	1
27	R-10066-A	Cork Plug (10 per pk.)	1 pk.
29	R-10033	Tie Rod	2
30	R-30018	Motor Adapter	1
31	ZA11167	Grommet	2
32	R-10030	Lift Rod Coupling (2-1/2 in. long)	1
33	R-40011	Pedestal Cover	1
34	R-10061	Flange Bushing	1
35	R-10062	Bearing	1
36	R-10063	Flange Bearing	2
37	ZF10168	Thrust Washer	1
38	R-10065	Steel Bushing	1
39	ZF10174	3/8-16 NC x 2-1/4 in.  Carriage Bolt	3
40	R-10070	Sprocket w/ Set Screw: 14 teeth (1800 RPM)	1
	R-10048	Sprocket w/ Set Screw: 17 teeth (1500 RPM)	1
41	R-40029	Electronic Timer: 115v	1
	R-40037	Electronic Timer: 230v	1
41A	R-40040	Timer Clips	2
42	RP-1500-23	Motor: 1/4 HP (115v/230v) (60Hz/50Hz) 1 Phase	1
42A	ZF10183	3/8 -16 x 1 in. Long Hex Head Screw	4
42B	ZF10168	3/8 ID Flat Washer	4
43	R-10058	Timing Belt	1
44	R-10055	Shim	1
45	ZZ10068	1/2- 13 x 2-1/2 in. Long Head Bolt	1
45A	ZZ10323	1/2 ID Lock Washer	1
47	R-10079	Clamp Screw	2
48	ZF10221	3/8 in. Lock Nut	3
49	ZF10222	1/2 in. Lock Nut	1
50	ZF10231	10- 32 x 1/2 in. Long Flat Head Socket Cap Screw	3
51	ZF10241	3/8- 16 x 3/4 in. Long Flat Head Socket Cap Screw	2
51A	ZF10240	3/8- 16 x 3/4 in. Long Hex Head Screw	2
52	114162	3/8- 16 x .62 in. Long Hex Head Screw	2
53	ZF10251	5/16- 24 X 1-1/4 in. Long Socket Head Cap Screw	1
54	R-20082	Adjustable Handles (pair)	1
55	ZA10148	#10-24 x 1/4 in. Socket Head Set Screw	1
56	ZF10271	3/8 ID x 1-1/2 in. OD Fender Washer	1
60*	R-10017	Timer Cord w/ Plug (110v)	1
60A*	R-10017-220	Timer Cord w/ Plug (220v)	1